PT Surveyor Indonesia (Persero) - Recruitment For SMK, D3, S1 Assistant, Checker, Inspector PTSI Desember 2018

cepagram.com

cdcindonesia.com - As early as all the job seekers, the following job information comes from one of the companies engaged in the survey in Indonesia, namely:PT Surveyor Indonesia (Persero) - PTSI is a reputable state-owned independent assurance services company in Indonesia. PTSI has core business focus on Surveying, Verification, Inspection, Certification and Consultancy. PTSI has its business activities focused in 2 business process: Business Process related to Operations and Business Process related to Corporate Policy Establishment. PT Surveyor Indonesia (Persero) is a state-owned company and is majority owned by the Government of Indonesia. At present, PTSI is 85.12% owned by the Government of Indonesia, 10.40% by Societe Generale de Surveillance SA, and 4.48% remaining shares by PT SUCOFINDO (Persero). Based in Jakarta, PTSI conducted business operations in all parts of Indonesia under the management of 11 domestic branch offices, 1 Singapore overseas branch offices, 3 UWK offices, 3 representative offices and directly employs 1,581 employees. PT Surveyor Indonesia (Persero) also supported by 2 key subsidiary companies, namely PT Surveyor Carbon Consulting International (99.00%) and PT Synerga Tata International (60.00%).
In line with its continued expansion program, PT Surveyor Indonesia (Persero) invites qualified candidates to fullfill the position as follows

Site Technical Assistant

Requirements

• Male or Female.
• Degree in multi discipline for Civil / Structural / Piping / Mechanical / E&I.
• Fully trained and have a minimum 10 years of experience in inspection and have specialization in mechanical completion, start up and commissioning for required discipline relating with  offshore and onshore facilities for oil and gas or petrochemical industries.
• Have good understanding of applicable codes and standards such as ACI, ASTM, IEC, NEMA, ICS 2, API, ISA, API MMPMS, ASME PTC, NEMA MG, NFPA, ISO 9000, ASME API, ASTM, AWS D11 and other standards which applicable in oil and gas industry.
• Fluent in English, both oral and written.

UT Cross Checker

Requirements

• Male or Female.
• Degree in Mechanical / Structural / Metallurgy Engineering or equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and have a minimum 10 years of experience in welding inspector especially in Ultrasonic Testing work of structural fabrication, piping fabrication and installation and other fabrication work association with an of offshore and onshore facilities for oil and gas.
• Have good understanding of applicable codes and standards such as ASME B31.3, ASME B31.8, BS, API STD 650, IACS  and classification rules and other codes and standards related to structural and pipe.
• Fluent in English, both oral and written.
• Possess brevet certification in CSWIP 3.1/3.2 or AWS / CWI or ASNT  Level II (UT) or other equivalent qualification recognize by client.

Coating Inspector

Requirements

• Male or Female.
• Degree in Mechanical / Structural / Metallurgy Engineering or equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and have a minimum 10 years of experience in Coating field of offshore and onshore facilities for oil and gas.
• Have good understanding of applicable codes and standards such as ASTM A123/A 123M, ASTM D3359, ASTM D4417, NACE RP0178, NACE RP0188, NORSOK M-501-5, NS 476, SSPC  GUIDE 15, SSPC QP 5, ISO 8502-3, ISO 8503 and other codes and standards related to coating
• Fluent in English, both oral and written.
• Possess brevet certification in NACE Coating inspector (Level III or II) or other equivalent qualification recognize by client.

Civil Inspector

Requirements

• Male or Female.
• Degree in Civil Engineer or equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and have a minimum 10 years of experience in Civil construction project.
• Have good understanding of applicable codes and standards such as ACI 117/117R, ACI 301, 1CI 308R,ACI 318/318R, ACI 357R, ASTM 767, ASTM 775, ASTM A615, ASTM C31, ASTM C94, ASTM C150, ASTM C192 and other codes and standards related to material handling and inspection
• Fluent in English, both oral and written.

E&I Inspector

Requirements

• Male or Female.
• Degree Electrical/Instrumental Engineering or equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and a minimum 10 years of experience in inspection of electrical and instrumentation material and equipment test such as switch gear, motor control and other equipment used in offshore and onshore facilities for Oil and Gas.
• Have good understanding of applicable codes and standards such as IEC 60947-4-1, EIC 61850, IEEE 1613, NEMA ICS 2, API STD 1164, ISA 95.00.01, ISA 75.17, API RP 551, API RP 551, API STD 520 PT I, , API STD 521, API STD 598, API SPEC 6A, API STD 609, API STD 607, API MMPMS 14, ASME PTC 19.3, NEMA MG 1, NFPA 70, NFPA 72, NFPA 750, ISA 12.13.10, BSI BS EN 50082-2, ASME B1.20.1,and other codes and standards rules related to Electrical equipment and instrumentation.
• Fluent in English, both oral and written.

Rotating Equipment Inspector

Requirements

• Male or Female,
• Degree in Mechanical / Structural / Metallurgy or Engineering equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and a minimum 10 years of experience in assembling or manufacturing inspection of rotating and other such as pump, compressors, gas turbine, packaged units, and other equipment used in offshore and onshore facilities for Oil and Gas.
• Have good understanding of applicable codes and standards such as API RP 500, API STD 616, API STD 617, API STD 670, API STD 671, ASME B16.5, ASME B16.1, AMT B15.1, ASME B31.3, ASME Section VIII Div. I and  and other codes and standards rules related to inspection of rotating equipment and unit packaged.
• Fluent in English, both oral and written.

Mechanical Inspector - Static Equipment

Requirements

• Male or Female
• Degree in Mechanical / Structural/Metallurgy or Engineering equivalent or Diploma in Engineering or Technical Vocational High School (SMK).
• Fully trained and a minimum 10 years of experience in welding inspection work, fabrication or preasure vessel and other fabrication work associated with and onshore and offshore facilities for Oil and Gas
• Knowledgeable in rules and standards operation such as ASME B16.5, ASME B16.20, ASME B16.47, ASME 2235, ASME Section I, ASME Section IIA,ASME Section VIII Di. I and II, ASME Section V, NACE requirement and other codes and standards rules related to fabrication of pressure vessel.
• Fluent in English, both oral and written.
• ASME Authorized Inspector.
• CSWIP 3.1/3.2 or AWS/CWI.
• ASNT Level II(RT/UT/MT/PT).

Telecommunication Inspector

Requirements

• Male or Female.
• Qualified engineering university graduates, minimum qualification a bachelor of science or Engineering Degree majoring in Electrical Instrumentation or Telecommunication Background.
• Have a minimum 10 years of experience in cabling and fiber optic telecommunication system, facility security system, ship to shore link system, offshore safety communications and radar, radiation hazard assessment and control for telecommunication system.
• Have good understanding of applicable codes and standards related to discipline.
• Fluent in English, both oral and written.

Note: Ingin mendapatakan informasi langsung dari email kami untuk lowongan kerja CPNS, BUMN, Perusahaan Swasta, Multinational Company, dan bidang lainnya silahkan, mendaftar disini.

For further information, please refer official source from PT Surveyor Indonesia (Persero) on following link below. If you feel have the right talent and skills, please send your updated CV, transcripts, portfolio, application letter in jpg/pdf file to sdmsijak@gmail.com (maximum attachment file size of 10 mb). Please write applied position tittle in your email subject.source
Closing date 10 December 2018.Application will be treated strictly confidential and only short-listed candidates will receive responses.